| Symptom | Reason | Action |
|---|---|---|
| No beep after power is switched on. | The power code is not properly plugged | Plug the Power Cord into the power socket properly. |
| No display on the display panel | The power code is not properly plugged | Plug the Power Cord into the power socket properly. |
| Induction cooker stop working after successive short beeps. | Vessel material or size is not suitable. | Ensure the vessel is made of steel or iron base & has a base diameter larger than 12 cm (4.72”) |
| Induction cooker stop working after successive short beeps. | Vessel is not placed in the center of the glass top. Or no vessel ON the cooker | Place the Vessel in the centre circle of the Glass Top. |
| The heating stops abruptly when cooking | Vessel temperature is very high | Wait till the Vessel cools down |
| The heating stops abruptly when cooking | Once the set temperature is reached the unit will switched off automatically | If required, rest the temperature and start cooking |
| Vessel does not heat up to the required temperature | The bottom of the Vessel is not flat | Use flat bottom vessel only. |
| Display failure code is E3 or E6 | Very high internal temperature or over Glass top. | Switch off the Induction Cooktop Switch on, after the Induction Cooktop Cools down. |
| Display failure code is E1, E2, E4, E5, Eb & Ec. | Internal failure | Contact Customer Care |
| Display HI | High Voltage | Switch on the appliance afterincoming voltage is stabilize. Please check the input ac voltage should be between 220-240 volts |
| Display LO | Low Voltage | Switch on the appliance afterincoming voltage is stabilize. Please check the input ac voltage should be between 220-240 volts |
